The New 4-core Raspberry Pi

paranoidjack

Seems my RaspberryPi2 is only seeing approximately 750MB of RAM rather than the full 1024 - that's even with gpu_mem=16 in boot/config.txt

# uname -s -r -m
Linux 3.18.7-3-ARCH armv7l

# head -1 /proc/meminfo
MemTotal:         759660 kB

I'm using this image: #862141

After some investigating: http://archlinuxarm.org/forum/viewtopic.php?t=8387&p=44961 - will we see an updated version soon with the kernal fix?

kwcpaul

I have check that I hv enter username and password corretly.. but still cannot access spotify

Why i know i have enter correctly? Because when i use volumio, i can listen to spotify entering the same things

ACX

kwcpaul wroteI have check that I hv enter username and password corretly.. but still cannot access spotify

Ok so please tell me with more details what do you mean with "the spotify session at the library page will not load". What steps did you follow?

kwcpaul

ACX wrote
kwcpaul wroteI have check that I hv enter username and password corretly.. but still cannot access spotify
Ok so please tell me with more details what do you mean with "the spotify session at the library page will not load". What steps did you follow?

1. click on for spotify
2. enter the username and password
3. apply.
4. go to library and choose spotify.
5. change to spotify engine.
6. click spotify library again.
7. the circle keep spinning.

thanks

ACX

kwcpaul wrote1. click on for spotify
2. enter the username and password
3. apply.
4. go to library and choose spotify.
5. change to spotify engine.
6. click spotify library again.
7. the circle keep spinning.

I've just replicated the exact steps (which are right, btw) and on my setup (latest Frank's image on the Rpi2) it works as expected, showing the notification:
Switch Player Engine
Current active player engine: Spotify
and I can browse my playlists on Spotify.

Can you post your debug info?

E39S62

Hondagx35,

I just acquired a Pi 2 after using a B+/RaspyPlay4 with Rune Audio for a month or so now. I'm hoping the Pi 2 helps with interface stutters and some other issues I've encountered.

Can you provide any guidance for utilizing the RaspyPlay4 I2S DAC with the PI2? I don't see it in the list of DACs in the config.txt.

Thanks for your work on the Pi 2 image!

kwcpaul

ACX wrote
kwcpaul wrote

Can you post your debug info?

Thanks! I will try again when I get home and post debug info if it fails.

npejcic

E39S62 wrote Can you provide any guidance for utilizing the RaspyPlay4 I2S DAC with the PI2? I don't see it in the list of DACs in the config.txt.

You can use IQAudioDAC drivers for RaspyPlay4, it have compatible drivers.

kwcpaul

kwcpaul wrote
ACX wrote
kwcpaul wrote

Can you post your debug info?
Thanks! I will try again when I get home and post debug info if it fails.

http://pastebin.com/FG8ww1Uy

i still cannot get into spotify after fresh install of image

thanks

hondagx35

Hi kwcpaul,

i still cannot get into spotify after fresh install of image

Are there any special characters like space in your username or password?
If so, try to input them in quotes.

Frank

kwcpaul

My username and password are some letters and numbers.. do u mean enter it like this? "username", "password"?

hondagx35

Hi kwcpaul,

My username and password are some letters and numbers.. do u mean enter it like this? "username", "password"?

Yes, but if there are no special characters in it like spaces, then there is no need for doing this.

Please login to your PI and examine or post this file:

 /var/log/runeaudio/spopd.log

Frank

simoncn

Is the Cirrus Logic audio card supported on the current beta build? If not, is there any estimate for when this support will be available?

hondagx35

Hi,

simoncn wroteIs the Cirrus Logic audio card supported on the current beta build? If not, is there any estimate for when this support will be available?

No it isn't.
The wolfson card is on the marked for more than one year and did not find its way into the mainline kernel.
For each update you have to compile your own kernel.
The Cirrus Logic card is the same only with support for RP + versions.
I do not believe in Cirrus Logic (wolfson) to get their card supported like others.
So for me it is not worth the work to integrate this card.

If someone would like to do this here is the kernel source code. Instructions are also available here.

Frank

kwcpaul

hondagx35 wroteHi kwcpaul,

My username and password are some letters and numbers.. do u mean enter it like this? "username", "password"?
Yes, but if there are no special characters in it like spaces, then there is no need for doing this.

Please login to your PI and examine or post this file:
 /var/log/runeaudio/spopd.log
Frank

cannot find such file??

hondagx35

kwcpaul wrote cannot find such file?

Sorry the file is
/var/log/spopd.log
and only there after you switched to Spotify.

kwcpaul

hondagx35 wrote
kwcpaul wrote cannot find such file?
Sorry the file is
/var/log/spopd.log
and only there after you switched to Spotify.

2015-03-21 09:35:34 [SPTF] 08:35:34.793 I [ap:1752] Connecting to AP ap.spotify.com:4070
2015-03-21 09:35:34 [SPTF] 08:35:34.853 I [user_cache:135] UserCache::initiateGetUsers() will query for 1 users
2015-03-21 09:35:34 [SPTF] 08:35:34.888 I [offline-mgr:2084] Storage has been cleaned
2015-03-21 09:35:35 [SPTF] 08:35:35.034 I [ap:1226] Connected to AP: 194.68.29.197:4070
2015-03-21 09:35:37 [SPTF] 08:35:37.079 I [user_cache:135] UserCache::initiateGetUsers() will query for 1 users
2015-03-21 09:35:37 [SPTF] 08:35:37.330 I [user_cache:135] UserCache::initiateGetUsers() will query for 64 users
2015-03-21 09:38:01 [SPTF] 08:38:01.387 I [offline_authorizer.cpp:297] Unable to login offline: no such user
2015-03-21 09:38:01 [SPTF] 08:38:01.409 I [ap:1752] Connecting to AP ap.spotify.com:4070
2015-03-21 09:38:01 [SPTF] 08:38:01.586 I [ap:1226] Connected to AP: 194.68.30.34:4070
2015-03-21 09:38:02 [SPTF] 08:38:02.440 E [ap:3915] Connection error:  410
2015-03-21 09:38:02 [WARN] Login failed: Bad username and/or password
2015-03-21 09:38:02 [ERR ] Could not get the playlist container.

hondagx35

Hi kwcpaul,

2015-03-21 09:38:02 [WARN] Login failed: Bad username and/or password

I think you are doing something wrong.
- you entered your credentials (name and password) on the settings page?
- you applied the settings change with the button beneath last.fm settings?

You can also enter your username and password directly in the configuration file.

nano /etc/spop/spopd.conf

# RuneAudio SPOP configuration
# SPOP Spotify client daemon by Thomas Jost (Schnouki)
# GitHub repo: https://github.com/Schnouki/spop

### Spotify auth settings ###
[spop]
spotify_username = yourname
spotify_password = yourpwd

kwcpaul

hondagx35 wroteHi kwcpaul,

2015-03-21 09:38:02 [WARN] Login failed: Bad username and/or password

nano /etc/spop/spopd.conf

# RuneAudio SPOP configuration
# SPOP Spotify client daemon by Thomas Jost (Schnouki)
# GitHub repo: https://github.com/Schnouki/spop

### Spotify auth settings ###
[spop]
spotify_username = yourname
spotify_password = yourpwd

For both of your questions, the answers are yes.
and i have try entering my username and password at the spopd.conf file.
But it does not work too..

mjb

A special thanks to Frank for his build. My Raspberry Pi 2 arrived a short while ago, and works superbly with it. I'm using an iDSD nano DAC via USB, no clicks or dropouts. Vielen Dank Frank!

« Previous Page Next Page »