RuneAudio 0.3-alpha for Raspberry Pi

exetico

Great news! Thanks for the quick response, and again - all the work behind

andy.room

After having tried the 0.3 alpha release for some time, I have noted down the following problems:
1. AirPlay is visible by IOS devices or iTunes, but music is not heard when playing. The problem is exactly the same from iTunes on PC and iPad.
2. Database updates automatically every time the Raspberry is turned off and on again (not a major problem, but time consuming)

I apologize if the above topics have been already reported by other users.
Thanks for your kind support.
A.R.

wick

OK, I've now tried 0.3alpha with r-pi and 3 dacs: pi-dac, hi-fi, and usb dragonfly.
I've had excellent results with all of them.
I've also tried both nfs mounts and local usb - no problems, though I've had to force mpd updating
for the usb mount, sometimes 2 or 3 times, before it seems to actually do anything.

It's really quite good already.
I had one question - I am sure that folks here will know - what's the std cookbook method to
expand the filesystem? The archlinux setup on the image is this:
Device Boot Start End Blocks Id System
/dev/mmcblk0p1 2048 186367 92160 c W95 FAT32 (LBA)
/dev/mmcblk0p2 186368 3667967 1740800 5 Extended
/dev/mmcblk0p3 3667968 5668863 1000448 82 Linux swap / Solaris
/dev/mmcblk0p5 188416 3667967 1739776 83 Linux

So, I would typically use fdisk to delete p2 and then expand back out via resize fs, but was a bit
uncertain given the block alignments, and that swap space.
Thanks for any tips.

Aquarius

wick wrote what's the std cookbook method to
expand the filesystem?

Personnally, I used Gparted on another computer.
On Gparted I see:
- /dev/sdc1 : boot partition (primary)
- /dev/sdc2 : extended partition (primary)
- /dev/sdc3 : swap (primary)
- /dev/sdc5 : / (secondary)

- Move the swap to the end of my 8GB SD Card
- Extend the Extended partition
- Extend the logical volume (sdc5) inside the Extended partition.

Your names will be different.

andy.room

andy.room wroteAfter having tried the 0.3 alpha release for some time, I have noted down the following problems:
1. AirPlay is visible by IOS devices or iTunes, but music is not heard when playing. The problem is exactly the same from iTunes on PC and iPad.

The cause of the AirPlay failure was caused by my network.
I have made a new clean install and everything seems to work fine.
Thanks for the nice product.
When are you planning to publish the 0.3 Beta version?

ACX

andy.room wroteThe cause of the AirPlay failure was caused by my network.
I have made a new clean install and everything seems to work fine.
Thanks for the nice product.
When are you planning to publish the 0.3 Beta version?

Thank you for your report, this excludes sneaky bugs.
The 0.3-beta is on the way, we are polishing the last details. Orion managed to further improve the system stability and the overall performance of the RuneUI, and to fix the most critical bugs that emerged from the testing of the alpha release.

metalrob

Hi, Runers!

Would you please implement TuneIn Radio? I think it's the best webradio provider. Would be great!

In case you do so- a lot of thanks

Greetingz, Robert

ACX

metalrob wroteHi, Runers!

Would you please implement TuneIn Radio? I think it's the best webradio provider. Would be great!

In case you do so- a lot of thanks

Greetingz, Robert

Hi metalrob,
please post this kind of requests in the Feature request forum section.
BTW, it seems that TuneIn provides its API only for broadcasters and not for third party applications who would like to integrate the service, so I'm quite pessimistic about that.

davidgrundey

Firstly thank you for this awesome programme. I've been running the 0.3 alpha for a while and haven't had any major problems.

WiFi adapter didn't work from start but have fixed this with help from this post.
NAS workaround works for me in the moment (not using NAS - only to test)
USB workes perfectly every time (WD Elements)
Webradio: Some Dirble stations work, some don't. Can not add stream .pls files.
It works this way:
Find .pls online
Download to desktop
Open in notepad
Copy link
Paste in runeaudio
Done!

Had a thing today where the "connecting" thing was spinning and the GUI was greyed out. I could ping the pi and access the GUI by going to 192.168.1.26/settings or 192.168.1.26/mpd etc but not click on anything.
Fixed it with ssh sudo reboot

One minor issue is when clicking the back button to navigate back to previous folder in the library it starts from the top of the list and not from the last item selected. Bit annoying with long lists of files.

Sorry if I have duplicated anything and thanks for your help.

ACX

Hi davidgrundey,

davidgrundey wroteHad a thing today where the "connecting" thing was spinning and the GUI was greyed out. I could ping the pi and access the GUI by going to 192.168.1.26/settings or 192.168.1.26/mpd etc but not click on anything.
Fixed it with ssh sudo reboot

It probably was due a MPD crash... next time check the running processes with

pstree

and if you don't see MPD in the list restart it with

systemctl restart mpd

The same is working for other core processes (rune_SY_wrk, rune_PL_wrk, PHP, nginx, etc).

davidgrundey wroteOne minor issue is when clicking the back button to navigate back to previous folder in the library it starts from the top of the list and not from the last item selected. Bit annoying with long lists of files.

That is not supposed to happen, the normal behaviour is that the list is centered on the last item selected. Which browser/platform are you using?

davidgrundey

Hi ACX,

Thanks for quick reply. Will try the pstree command and restart next time and report back.

I'm using Win 7 and Chrome.

Cheers!

ACX

davidgrundey wroteI'm using Win 7 and Chrome.

This is really strange. Try to hard-reset the browser's cache with CTRL+F5 and see if it fixes the problem. Also check for javascript errors in the console. I've never experienced that problem with Chrome under Win8/Ubuntu/Android.

skrodahl

davidgrundey wroteHad a thing today where the "connecting" thing was spinning and the GUI was greyed out. I could ping the pi and access the GUI by going to 192.168.1.26/settings or 192.168.1.26/mpd etc but not click on anything.
Fixed it with ssh sudo reboot

Hi davidgrundey,
To stop this from happening, follow the instructions in this post. It will automate the restart of the MPD daemon.

davidgrundey

All working! Thank you!

cmh714

ACX wrote Hi metalrob,
please post this kind of requests in the Feature request forum section.
BTW, it seems that TuneIn provides its API only for broadcasters and not for third party applications who would like to integrate the service, so I'm quite pessimistic about that.

I dont think thats 100% accurate since PiBox has TuneIn working (I sometimes use it)....

ACX

cmh714 wroteI dont think thats 100% accurate since PiBox has TuneIn working (I sometimes use it)....

After a quick search in TuneIn's website I couldn't find any suitable information for a quick and easy integration. If you manage to gather info about that please report it in this thread.

cmh714

I will try ACX, but it may be easiest for you to d/l and look

I know its based off Mopidy which I think I saw on Rune0.3 (I just got off a plane and am a little burnt)

In the configs for it, there is nothing special for TuneIn other than a timeout setting.

wick

davidgrundey wroteFirstly thank you for this awesome programme. I've been running the 0.3 alpha for a while and haven't had any major problems.

WiFi adapter didn't work from start but have fixed this with help from this post.

Hi,
So - I also finally have wifi running - so both eth0 and wlan0 have IP addresses. What's the method to stop eth0 after this? When I reboot from the gui, having pulled the ethernet cable, the wifi does not get a dhcp address, and won't connect properly. I am certain I am doing something dumb, but what's the right procedure to use?
Thanks!

anadigi

I have mentioned this problem before; it seems these new versions having the similar problem(same problem with Volumio).
I have used the Raspfi V1 with no problem.

nofx

wick wroteHi,
So - I also finally have wifi running - so both eth0 and wlan0 have IP addresses. What's the method to stop eth0 after this? When I reboot from the gui, having pulled the ethernet cable, the wifi does not get a dhcp address, and won't connect properly. I am certain I am doing something dumb, but what's the right procedure to use?
Thanks!

It takes quite some time after it catches up wlan..

« Previous Page Next Page »