ODROID C1 & C1+ now officially supported by RuneAudio

hondagx35

Hi Leslie Yu,

your wifi dongle uses a RALINK chip (RT5572).
I'm not sure, but i think it is not supported by Arch Linux out of the box (see here).

Frank

leslieivy

Frank, thanks for your kindly help

because living room status, I just can use wifi for RuneAudio application, is wifi module 3 workable?
Wifi module 3
http://www.hardkernel.com/main/products/prdt_info.php?g_code=G137447734369

Best Regards
Leslie Yu

obee

I loaded v0.3, MPD works, however the library update keeps updating. I enabled "default" log level, created mpd.log, and restart libary scan, when the scanning ends, the web page (http://runeaudio.local) still showing library is updating. I type "mpc status" and it says "Updating DB" too.

Is there some setting required or is it a known issue?

(I put the music on NAS, using CIFS to mount to /mnt/NAS. I found that NFS not working due to permission issue but it seems because the C1+ and the NAS has different user account setup)

hondagx35

Hi obee,

when the scanning ends

Where did you see that it ends?

Is there some setting required or is it a known issue?

How big is your music library?
Did you mount the whole NAS or only the music folder?
MPD needs a bit to scan the library.

Frank

obee

It shows "updating db" when I typed "mpc status"

I have nearly 2T of music of FLAC, WAV. PCM & DSD. The NAS is Atom PC, it already took over 8 hours to update so I think it's not relate to hardware.

smallfat

Me, too

Best Regards
Michael

fish

Hi,
the image is rather old. Will there be an update in the near future or do you think the system will survive a "pacman -Syu". I tried the update way with a raspberry image some time ago and that left the image unusable!

cheers
fish

hondagx35

Hi,

fish wroteor do you think the system will survive a "pacman -Syu".

It definitively will not.

What do you expect from such an update?
Are there any problems with the current image?

Will there be an update in the near future....?

There will be a new image with the next release.
If i find the time i will make an update with support for a local browser.

Updating such an image is nothing you can do within a few hours.

Frank

fish

Hi,
for the pi 3 the image with kernel 4.x I've got support for the onboard wifi - this is of course not interesting for the odroid board. But it becomes very interesting with the dsd support. With the actual image I don't get any sound whenever I want to play some of my dsf files. This was the same on the pi3, but that changed with the new image: there the dsf files are working flawlessly.

Best regards
fish

hondagx35

Hi fish,

you can not compare Raspberry Pi and ODROID.

You always have to see what kernel is available for your device.
For the ODROID C1 we are now at Kernel 3.10.96 i think.

The DSD issue is something different and should be solvable with an updated mpd package.
Let me see what i can do.

Frank

jazzaj

Hi all,

My 2 cents 🙂

I experience no problem with DSD (.dsf) with my Odroid C1+ RuneAudio (original buid or latest build), same with volumio, but I need to compile a special MPD package with Archphile.

The only problem I have is pops and clicks with Runeaudio (FLAC 24/192), no problem at all with Volumio 1.55.1 and some problems with Archphile.

I suppose the differences between the software solutions depend on what kernel and/or what MPD versions they are based on (event if Rune/Archphile are based on Archlinux and Volumio on Raspbian/debian)

chris

hondagx35

Hi chris,

I suppose the differences between the software solutions depend on what kernel and/or what MPD versions they are based on (event if Rune/Archphile are based on Archlinux and Volumio on Raspbian/debian)

That may be the reason.

My only problem is, that i do not own all these USB DACs out there.
As i made the image i only tested it with the ODROID HiFi shield and two very cheap USB DACs.
With the HiFi shield i can play up to 32/384 without any problems.

Frank

jazzaj

Hi frank,

If I had the money, I would offer you an Audio-gd NFB1 to easily test your image 😉

fish

Hi Frank,
I don't wanna compare Odroid and the Pi. This was just a reply, to answer the question what I'm expecting from a new image and I do know the Pi much better whereas I'm just starting with Odroid Boards 😃
Best regards
fish

hondagx35

Hi fish,

a few new components (HiFi shield plus, VU7 plus) from hardkernel are on its way.
I like to wait with a new image until i have them on my workbench.

Frank

fish

Hi Frank,

the new hardware is really interesting. So I might wait for a new image easily :-)

cheers
fish

smallfat

Hi Frank,

In case of C2, I can edit zoom parameter of /home/root/.config/midori/config to change display zoom.
Is it works for C1+ image?

RGDS
smallfat

hondagx35

Hi smallfat,

.... I can edit zoom parameter .....
Is it works for C1+ image?

The C1 image doesn't support the local browser feature yet, so no it isn't.

Frank

smallfat

Hi Frank,

Will it be added to next release?

smallfat

hondagx35 wroteHi smallfat,

.... I can edit zoom parameter .....
Is it works for C1+ image?
The C1 image doesn't support the local browser feature yet, so no it isn't.

Frank

hondagx35

Hi smallfat,

Will it be added to next release?

Yes.

Frank

« Previous Page Next Page »